Pig from a plastic bottle - step-by-step instructions for making it yourself, photos, videos

During the summer months, you can find used plastic containers in every home, which can be an excellent material for original home crafts.
One of them is a piglet made from a plastic bottle, the step-by-step instructions for making which will allow you to easily make a decoration for the garden or the basis for a small country flower bed. Article on the topic: DIY crafts from plastic bottles.

These funny pigs

The pig is a very prolific animal.
That is why in our city apartments it is so often present in the form of cute piggy banks for money, as well as in the form of various souvenirs to attract wealth to the home. Some even keep pigs in their homes as pets and claim that this animal is not inferior in devotion even to a dog. Thanks to the master class presented below, you will learn how to easily and simply make a cute pig using unnecessary plastic bottles. This charming piglet can become a wonderful pot for garden flowers or simply decorate the landscape of your garden plot:

To make such a miracle, you will need the following materials:

sharp stationery scissors or knife;
one large plastic bottle for the pig's body and four small bottles for the legs and ears. The degree of “fatness” of the pig depends on the size of the large bottle;
acrylic paint, enamel, aerosol or any other permanent paint of your choice;
large and medium sized brushes;
pencil or felt-tip pen, paper;
glue gun;
black permanent marker;
a small piece of wire for the tail.

First, you need to draw templates for our pig’s ears on paper. They should be triangular in shape - sharp at the top and more rounded at the bottom. Then, using the prepared templates, we cut out the ears from a smaller plastic bottle.

You can make ears of different shapes, depending on which part of the bottle you attach the template to.

Next, you need to cut off the heads of four small bottles at some distance from the thread. These will be the legs. It is better to cut at a slight angle - this will make it easier to connect them to the body of the pig. All four hooves should be the same height.

The next stage is preparing the torso. A large bottle needs to be placed horizontally and several slits should be made in it: in the front part - two for the ears, in the back - one for the tail, and at the bottom - four for the legs.

Let's start assembling the piglet. We insert all parts of the body into the prepared cuts - ears, hooves and tail, and secure the joints of the parts with hot glue for reliability. Instead of a piece of wire twisted into a spiral, you can use a thin strip of plastic cut from one small bottle.

After this, we paint the pig, draw eyes on the face with a marker or glue ready-made plastic ones, and draw two circles of nostrils on the snout.

Depending on the purpose, you can leave the piglet whole or cut a hole in the upper part and fill it with earthen substrate for planting.

More information on how to make a piglet can be found in this video:

https://youtube.com/watch?v=1Y20-eMUgas

Step-by-step instructions for making a pig figurine

The shape of a lying plastic bottle resembles the body of a well-fed pig. For an exact resemblance, all that is missing is lop-eared ears, plump legs, a shaped snout and a hooked tail.

Preparation of parts

First, let's prepare the missing parts:

Legs. From half-liter bottles, cut off the top part with the lid at an angle. When using small plastic cups, their tops should also be cut at an angle so that they fit more tightly to the piglet's body. Make sure that the pieces are the same length.
Ears. On a piece of paper, draw a piglet's ear of any shape. We cut it out of a one and a half liter bottle. To do this, the bottle is cut into two halves along the neck and screw part. Then, according to the drawn pattern, the ear blank is cut out so that its base is at the beginning of the neck (up to the first rib). The ear cut from the middle part of the bottle turns out to be a larger, lop-eared one.
Tail. It can be bent from a small piece of wire, cut into a thin strip from the remains of plastic bottles.

The absence of certain additional elements for decorative finishing of the pig is not an obstacle to creating a plastic figure

Before assembly, you need to make several holes in a five-liter container:

Not far from the lid we cut 2 holes for the ears.
Just above the center of the top of the bottom of the bottle we make a small round hole for the tail.

Plastic bottles are easily cut with a regular stationery knife or scissors.

Assembling the figure

The figurine is assembled as follows:

Leg blanks are attached symmetrically to a five-liter bottle using a glue gun.

To attach the legs to the body if you don’t have a glue gun, you can use any universal waterproof glue

If the lower ends of the ears and tail are shaped like arrows, they will be easier to insert into the holes made.

Decoration

The assembled finished craft needs to be painted. Most often, pink shades of paint are used for this, because this is the color that a cheerful pig is associated with. Piglets of other colors (spotted, light beige) also look interesting. Or perhaps you would prefer a fairytale pig whose coloring will be fantastic: polka dots, flowers or frills.

If the craft is to be used outdoors, the paint must have water-repellent properties. After painting the pig (with a brush or by spraying it from a spray can), let the figurine dry thoroughly. Drying time will depend on the properties of the paint you purchased.

For durability, after the paint has dried, you can apply a layer of acrylic varnish on top of it.

The last step is gluing the eyes and drawing on the patch. There are different options for designating eyes:

voluminous buttons with eyelets. In this case, a small slot is made at the location of the eyes, a button loop is pressed into it and glued;
beads;
self-adhesive film of a suitable color.

Using a marker, draw a patch (two small black circles) on the bottle cap. If desired, you can add eyelashes, outline the contours of the ears, and create funny facial expressions on the pig’s face.

You can decorate the plastic pig however you like.

The presented step-by-step instructions are not dogma. Its task is to awaken imagination, to use non-standard materials at hand, so that your figurine turns out to be unique, inimitable, and special.

Since plastic piglets are most often installed outdoors, care should be taken to ensure their stability. To do this, even before painting, a weighting agent, for example, small pebbles, is poured inside.

Features of making a pig flowerpot

Almost the same scenario is used to make a figurine of a pig, in which you can plant garden flowers. The following steps will be distinctive:

One of the side parts is cut out in a five-liter container. The hole can be in the form of an oval, circle or rectangle.
Read also: Salad with beans and mushrooms: TOP 5 recipes with step-by-step photos
The cut hole is needed to fill the soil and sow the seeds.
On the opposite side, which will be the lower part of the body, it is necessary to make several drainage holes to drain excess moisture.
After assembling and painting the craft, a drainage layer (expanded clay, broken brick, clay shards, etc.) and fertile soil are poured inside and the flower you like is planted.

To prevent the piglet with flowers from turning over, you can first make a hole at the bottom and secure the craft with a wooden peg.

Let's create a pig from a plastic bottle with our own hands in MK

If you collect plastic bottles and don’t know what to do with them, then the idea of creating decorative elements is just for you. Plastic piglets are a very common craft. They are usually created very bright and funny. You can also make flower pots from plastic bottles, again with the image of cute pigs, and place them on the balcony or loggia.

Before you start creating plastic piglets, you need to decide on their appearance and size in order to understand what capacity the bottles need. Plastic containers for water, vegetable oil, beer, liquid soap, powder or detergent are excellent for such purposes. The larger the bottle you take, the larger the pig will be. The selected plastic bottles must be washed before work and all stickers removed, and if painting is intended, then before this procedure, degrease the surface of the bottle - this way the paint will adhere better. Acrylic paint is best for painting. If you use another paint, there is a very high probability that the paint will peel off quickly.

Before starting work, novice needlewomen also need to remember that for safety reasons, before assembling all the parts of the craft into a single whole, they must be melted so as not to cut themselves if you are careless. This can be done with a candle

In order to make a cute pig from an already unnecessary plastic bottle, you will need the following materials and tools:

Plastic bottle with a volume of at least 5 liters;
Plastic bottle 0.5 l (4 pcs.);
Plastic bottle 1.5 l (1 pc.);
Scissors;
Knife;
Pink paint;
Wire;
Brush;
Black buttons or beads (2 pcs.);
Paper (1 sheet);
Simple pencil;
Glue;
The marker is black.

Most of the declared materials, if necessary, can easily be replaced with some others. For example, if you don’t have four 0.5 liter bottles on hand to make legs from, you can alternatively replace them with yogurt cups or any plastic pipe. If you have pink paint in a spray can in your stash at home, you don’t have to buy paint in a can; you can also use existing paint. If you don’t have wire at hand, a thin plastic tape cut from a bottle can be a substitute. If there are no unnecessary buttons, you can simply draw the pig’s eyes with a marker.

We present to your attention step-by-step instructions for creating a plastic pig with photo accompaniment of the steps taken.

When all the tools and materials are prepared, you can begin the creative process of creating a decorative product in the form of a plastic pig.

Let's get to work. Take four 0.5 liter plastic bottles and cut off the top part along with the lid at an angle. These bottles will make legs.

Let's take a sheet of paper and a simple pencil and draw a sketch of a pig's ear. Next you will need a 1.5 liter bottle from which a pair of ears will be cut. Both the top part of a plastic bottle and the middle part are suitable for these purposes.

The next step is to prepare the pig's body. Let's take the largest bottle with a volume of 5 liters and use a knife to make slits: 2 holes for the ears (in the front, not far from the bottle cap), 4 slits for the legs. If you decide to make legs from yogurt cups, then you don't need to cut anything out, as these legs are simply glued on. Another hole is needed to attach the tail.

When all the elements are ready, you can assemble the pig.

Here the piglet is collected. Now you can start coloring it. We take a brush, paint and thoroughly cover the plastic pig with pink paint. Let the paint dry well. When the pig is completely dry, you need to take care of its eyes and snout. We will make the eyes using buttons or simply draw them with a marker. We will also draw holes on the patch with a marker.

At the end of the master class, we would like to recommend watching several videos on creating cute and funny plastic piglets.

Fantasy is the key to successful creativity

Traditionally, a piece of wire helps to achieve a curled shape for a pig's tail. If you don’t like a hook that is too thin or you haven’t found a suitable piece, it can be successfully replaced by a narrow strip of a plastic bottle left over from the legs.

The bottle pig's face is a special place for experimental ideas. The easiest and fastest way is to draw eyes with a marker. Whether it will be a sad or mischievous pig is up to the craftsman to decide. Original beady eyes are made from convex buttons, the loop of which is secured with wire in a plastic bottle. An expressive element of the muzzle can be made from self-adhesive film by coloring the pieces with the desired marker colors.

The neck of a plastic bottle is a small spot that also needs improvement. But the formation of the image is carried out at the final stage of making the pig.

Comment! Small bottles for legs will successfully replace plastic cups that contained yogurt or other small containers for fermented milk products. PVC pipes are another option for modifying piglet legs.

The pig's pink color is not a dogma. In nature there are black, beige and spotted individuals. Therefore, the craftsman holds all the cards, or rather the paints.

Coffee toy

The technique for making such a souvenir is quite simple, and to make naf-naf we will need: light calico, light threads, stuffing material - padding polyester or foam rubber, vanillin or vanilla sugar, cocoa, instant coffee, cinnamon, scissors, PVA glue, needle, old toothbrush, gel pen, small container for diluting fragrance, brushes, acrylic paints.

The toy can also be cut out to any size; to do this, just click on the picture and its size will increase. It is also advisable to transfer the cut out pattern to thin cardboard - it is more practical and convenient.

Now we will need our pen - we will use it to trace the resulting pattern; This should be done on fabric that is folded in half; if you plan to sew more than one toy, then you need to leave a space on the fabric between the patterns for a seam allowance of about 0.5 cm, while the seam itself is best done not along the drawn line itself, but nearby: the mark from the handle will not be noticeable if the fabric gets wet.

It is necessary to sew two layers of fabric along the line at the same time; the seam begins and ends between the hind limbs of our craft, leaving about 2 centimeters unsewn - this hole is necessary to make it more convenient to stuff the pig. Also, you can’t cut the seam threads so that it doesn’t come apart when we turn and stuff our pig.

We also cut out triangular teeth at the seam allowances, leaving a distance to the seam itself of about 0.2 cm - this will allow the seam on the toy to remain smooth and not bulge in different directions.

Now we turn it inside out and stuff the stitched pig; For particularly narrow spaces, the ends of folded scissors are suitable. We fill the toy with padding polyester using the unsewn holes: the more padding polyester there is inside, the more “plump” and “pot-bellied” our pig will be. It is necessary to carefully sew up the holes through which we stuffed our pig and thread it - this will help us easily hang our pig to dry.

Now let’s prepare the flavoring for our craft: dilute 40 ml of boiling water in a prepared container and add a teaspoon of coffee. Then the remaining ingredients - vanilla, cinnamon, cocoa - add about a quarter of a teaspoon to the resulting mixture.

Stir everything thoroughly and cool. Then you need to add about half a teaspoon of PVA glue to the mixture and mix thoroughly.

Now we need to dry our toy; To do this, hang it on a wire rack in the oven, turned on on low heat, for a quarter of an hour. If, after drying, there are still wet spots on the toy, you need to turn off the oven and dry our workpiece in this way.

Let's start painting - first with a simple pencil to outline the details, and then with acrylic paints. After the paints have dried, you can attach a loop or magnet to the coffee toy - then you can hang it on the Christmas tree or on the refrigerator.

It is advisable to avoid getting the toy wet. Our wonderful DIY coffee pig is ready!

Paper pigs

Applications made from colored paper are not only the best way to spend time with your child, but they are also easy to make. You just need to choose a suitable drawing and bring it to life.

You can first draw a template on plain paper and then transfer it to colored paper or cardboard. If you don’t have any talent for drawing, then ready-made templates will come to the rescue.

And then we turn on our imagination and finalize the application:

you can add buttons;
finish drawing small elements;
Decorate the pig with shiny rhinestones or sequins.

And now your paper craft in the shape of a pig is ready!

In addition to applications, there are many more options for creating paper pig crafts:

Young and not so young readers will love bookmarks in the shape of mischievous pigs. For older children, you can suggest making a bookmark in the form of origami, and for a small child, a simple version of the applique with a slot for the corner of a book page in the form of a pig’s mouth will be suitable;
you can build a funny piggy box, which will turn into a surprise if you place candy or a sweet gift inside;
It’s easy and simple to make toys for a Christmas tree or a pendant in the shape of a pig from paper to decorate your home;
a small applique in the shape of a pig will be an excellent decoration for a homemade postcard, and if you want something unusual, you can make a pop-up card with a three-dimensional figure.

What you need to create piglets from plastic bottles

To do this you need to prepare:

Plastic bottle with a volume of 5-6 liters
A plastic bottle with a volume of one liter or one and a half, if you don’t have one, then maybe two liters.
4 plastic boxes or 500 ml plastic bottles
Black marker
Scissors
Paper knife
Glue "Moment"

Step by step execution:

We take a 6 liter bottle and remove the stickers and everything else from it. Take a marker and mark the hole for the flower bed. A felt-tip pen for CDs is perfect for this. We cut it out using ordinary scissors, but it is important to first make a cut with a paper knife to make the work easier. Preliminary preparation has been completed. Let's start cutting out the remaining parts. On the body of a two-liter bottle, draw an eye, then mark about a centimeter for fixation. Carefully cut out. Then we take and circle the ear so that the second one is the same size. Cut it out. Next we cut out the tail and cut the strip with scissors. To make the ponytail more natural, you need to twist it, take a regular hair elastic, roll it into a ring and secure it with an elastic band. To paint the animal, it is best to use paint for outdoor use. Paint small parts separately, and paint the legs on the pig itself. Once everything is painted, wait a while until the parts dry. It is not necessary to make pig legs; you can use wooden supports for this. If paws are necessary, then mark their location in advance. Glue the paws using Moment glue and wait for them to dry completely. To make the legs, you can use the necks of half-liter bottles. As soon as the pig's legs are glued, you need to put it down and mark the places where the ears will be located. To do this, you need to attach them vertically and draw a line for the cut

Carefully make a slot and insert the eyelet into it. The plastic should hold the ear perfectly, so no additional fixation is needed

We also attach the tail to the back of the back in the same way. Next comes the most crucial moment - painting the parts. It’s good if you have a can or spray paint available. If you don't have one, use a simple brush. To begin with, it is better to paint the bottom of the leg, and only then move on to the top. At the same time, it is very convenient to hold the piglet by the nose, so there is no need to screw the snout in advance. Now all you have to do is wait for the product to dry. Ideally, if left undisturbed for about 8-10 hours. As soon as the set time has passed, you can start decorating the pig. We secure the patch, and then use a marker to draw the nostrils. You can either draw eyes or glue pre-purchased ones; they can be purchased at any craft store. Draw the eyelashes and mouth and you're done. You can continue to decorate the products at your discretion. Add a bow to the ponytail or glue a few artificial flowers. Next, we turn the cool little animal into a functional item for the garden plot. A small number of holes are pierced in the bottom of the pig. It’s easier to do this if you heat a screwdriver or other metal object over a fire. Then we add drainage, and begin to plant vegetation on the upper part. The pig is ready for the garden.

Everyone in their home probably has a large number of different items that are not very convenient to store and seem a pity to throw away - remnants of disposable tableware, bags, old newspapers and plastic containers of various shapes. Of course, you will say that you can just put it all in one big garbage bag and throw it away, but if you use a little imagination, some of these seemingly completely useless things can turn into original crafts. For example, from this article you will learn how to make a pig from a plastic bottle with your own hands. This method of recycling will not only help save the environment, but will also entertain adults and children.

Pig waterer for plants

Surely everyone has a used container of household chemicals with a handle in their home. It can be used to create a convenient watering can in the shape of a pig for caring for indoor flowers. Below are step-by-step instructions for making it.

First, plastic containers must be cleared of labels and stickers so that they do not interfere with the painting of the product in the future and do not spoil the appearance. Remaining adhesive can be washed off with soapy water or dried and the stickers can be removed using a hairdryer.

Related article: Knitting openwork blouses

For the legs, you can also use necks from smaller plastic bottles, but in this case they are not inserted into the slots, but are simply attached to the pig’s body with glue. You can also use empty thread spools, old baby cubes, or small plastic medicine bottles instead of bottle necks. If the bottle body has a stable rectangular shape, you can do without legs altogether.

Next, all that remains is to draw the eyes and snout with a marker or black paint. The watering can is ready to use!

DIY pig from a plastic bottle.

Plastic bottles are an invention of civilization. The invention is convenient, but at the same time, these bottles accumulate a lot and quickly. Craftsmen have learned to make various interesting, useful and beautiful things from them. For example, five- and six-liter bottles have won the championship as a material for garden decoration. They create real masterpieces, even build gazebos and utility rooms, as well as various animals that will decorate any area. This master class will tell you how to turn an unnecessary six-liter bottle into a cute pig.

In addition, our pig will not only be a decoration, but also a mini-flower bed or flower pot.

To make a pig you will need:

- five or six liter plastic bottle; - liter, one and a half or two liter plastic bottle; — 4 plastic boxes or half-liter plastic bottles; — paint for street work; - black marker; - scissors; - paper knife; - “Moment” glue or any similar one.

So let's get started. 1. Take a six-liter bottle, remove the stickers and holder from it.

Next, mark the location for the hole for the future flower bed. A CD marker works best on plastic.

Now let's cut it out. Plastic cuts well with scissors, but first make a cut with a paper knife - this will simplify the work. Here the preparation for the pig is ready.

2. The next stage is to cut out additional parts. On the body of a two-liter bottle we draw an ear, then mark a centimeter somewhere to secure it.

Let's cut it out. Then we trace the finished ear on the bottle with a marker so that the second one turns out the same. Let's cut that out too.

The ears are ready. Cut out a strip - this will be the tail. To make it look twisted, we roll it into a ring and secure it with an elastic band, and leave it for a while.

3. You can paint the ears, tail and snout separately, or on the product itself. Based on experience, it is better to paint small parts separately, but the legs - on the product. If your pig will “live” on the street, then it is better to use paint for street work. I used the enamel that was used to paint the swings on the playground. Small details are painted. We leave them to dry.

4. In principle, you don’t have to make legs for the pig, but put it on wooden supports in the flowerbed. If you decide to attach the pig’s hooves, then first mark the place where they will be located.

In this case, instead of legs, I used unnecessary jars of gouache paints. We glue them with Moment glue, press them down, and leave them to dry.

The legs can also be made from the necks of half-liter plastic bottles, simply cutting them off with a margin, and about a centimeter - cut into fringes so that they stick better. Tall plastic lids, like those from fabric softener or liquid laundry detergent, are also suitable.

5. When the legs are glued, put the pig on them and mark the places where the ears will be. To do this, place the ear vertically and draw a cut line.

We cut it carefully and insert the ear into the slot. The plastic will hold the workpiece tightly, so no additional fixation is required.

In the same way we attach the tail to the back of the pig.

6. One of the most important stages is painting. If you have a can or spray paint, use it. If not, the plastic can be painted well with a regular brush. It is better to paint the bottom and legs first, and then the top. It is very convenient to hold the pig by the nose, so it is better not to screw the snout in ahead of time. Now the pink pig is ready to go dry.

It is better to leave it in this state for 8-10 hours, for example, overnight.

7. When our pig has dried, it’s time to start decorating. We screw the “patch” on, and then draw nostrils on it with a marker. You can also draw eyes, or you can glue ready-made ones, which are sold in any craft store. We finish drawing the eyelashes and mouth - our pig is ready.

Of course, at this stage you don’t have to stop the decor, but for example, attach a funny bow to the pig, draw rosy cheeks on her, and spots or flowers on her sides. Here you can give free rein to your imagination.

7. Now we turn the fun toy into a functional piece of garden decor. We pierce several holes in the bottom. It is very convenient to do this with a screwdriver or other hot metal object heated over a fire. Now we pour drainage on the bottom, earth on top - and plant the plants. The piggy flowerbed is ready.

The final look of the craft. Photo 1.

The final look of the craft. Photo 2.

The final look of the craft. Photo 3.

For now she will live on the balcony, and over time she will move to permanent residence in the country.

We hope that the master class will help you easily get such a cute resident on your property.

Video bonus: pompom pig

All the step-by-step instructions presented in the article for making homemade pig souvenir toys - the symbol of the coming 2019 - are very simple; their repetition requires simple materials that can be found in every home. With a little patience, skill and care, you can make any of these toys yourself.

You can arm yourself with threads and nails and make paintings in the style of pig string art:

A pig souvenir is a gift that will not leave anyone indifferent; it will give joyful emotions to everyone! Dare and create with our master classes!

What do you need to create piglets from plastic bottles?

There are many options for the availability of materials for making a pig from a plastic bottle

. In our case, you need to have:

a 5-liter plastic bottle for the body of the craft (1.5 and 2 liter bottles are suitable for smaller piglets);
a 2-liter plastic bottle to make pig ears, or a yogurt cup;
4 cups or plastic bottle necks will do to make legs for the animal;
2 large buttons for the figurine's eyes;
rope for the ponytail.

You will also need the following tools:

pink paint that can repel water;
scissors with marker and brush;
construction gun for gluing parts.

Now you can begin the creative process.

First you need to prepare the details of the figurine; you should cut out the body, ears and legs. Then you need to glue all the components together with a glue gun. The next stage is painting the craft with pink paint. After the pig has been painted, it should be allowed to dry in the sun for 24 hours. When the figure is dry, you can glue the eyes in the form of buttons. Using a brush, the piglet needs to complete the contours of the ears, snout and eyelashes.

As you can see, there is nothing complicated. You can make several piglets of different sizes, for example, a mother and her babies.

To do this, you will need to cut a piece of a plastic bottle on top of the supposed back of the pig. There is a place to fill up the soil for the flowers, into which the seeds are sown.

DIY piglets from plastic bottles photo

Watch a video on the topic, flower beds made from plastic bottles:

Thus, beautiful decorative flower beds in the shape of animals will appear on yours.

Photo gallery: ideas for design and placement of plastic pig figurines

The piglets can be painted in different colors to make it more fun

Piglet figurines can be placed on a small hill or the area around them can be cleared a little. If you are not lazy and make a few piglets from plastic bottles, you will get a picturesque and funny lawn. Additional elements next to the piglet figurines will add originality to the composition.

Plastic pigs are an additional touch in the design of a flower bed. A pig flower bed made from plastic bottles is not only original, but also practical.

The peculiarities of making a pig figurine are the absence of costs and a minimum amount of time, independent choice of the shape and color of the craft. Most often, plastic piglets are painted pink. Next to the pig, you can “plant” flowers from the same material from plastic bottles

How to make a pig figurine from a plastic bottle?

Stages of work:

Stage 1: it is best to take a liter or one and a half liter bottle to make a piglet. Once all stickers and labels have been removed from the bottle, you can move on to the next step.

Stage 2: if you don’t want to paint the bottle, you need to first sew a cover for it, which will make it look like a pig. Pink felt is perfect for this purpose; it needs to completely cover the bottle, from the neck to the bottom.

Stage 3: in order to sew a cover, you need to first prepare a pattern by separately sewing the legs, tail and ears of the future piglet to the cover. All these parts of the figure’s body can be additionally stuffed with padding polyester to give them natural volume.

Stage 4: after this, eyes and a patch are sewn onto the cover, which can be a bottle cap.

You can make a piglet in another way:

rinse and dry the desired bottle;
in order to make the legs, they are cut out from the necks of other bottles with a volume of one liter;
ears and a tail are cut out from other bottles;
the ears need to be bent a little and attached to the bottle with wire;
the legs and tail of the pig are attached in the same way;
Now you can paint the piglet pink; acrylic-based paints are perfect for this.

As can be seen from the above, piglets from plastic bottles

- the task is quite simple. It is enough just to devote a little time to its implementation and make a little effort. The piglet created will decorate your summer cottage for a long time and delight the eyes of the owners and their guests.

Piglets made from plastic bottles

Garden crafts made from plastic bottles - 5...

A cute pink pig from a plastic bottle will decorate your garden or yard, and on New Year's Eve 2022 it will take pride of place on a brightly decorated Christmas tree.

And since making a pig from a plastic bottle is not difficult even for a child, you can take part in the traditional winter competition of New Year’s tree decorations with it.

By using your imagination, you can turn your piglet into a fashionable pig or an elegant, stylish boar. Everything will depend on what details will be used to create the image.

So, how to make a pig from a plastic bottle?

First, you need to arm yourself with:

scissors
brush
black marker
white and pink acrylic paint (you can take a spray bottle)
white and pink cardboard

Cover the entire surface of the bottle with pink paint.

We leave the bottle to dry, in the meantime we draw ears with a long base on the cardboard, which will help us attach them to the bottle base.

Carefully cut out the ears.

And we insert them into narrow slots in the bottle. The easiest way to make such slits is with a sharp stationery knife or even a regular table knife.

Cut out cute oval eyes from white cardboard or foamiran and draw pupils on them with a black marker.

Glue the eyes to the bottle. We glue two black circles onto the cork - we get a patch.

Now we cut out four rectangles from pink cardboard, twist them into tubes, and fix them with a stapler.

We get four legs for the pig.

One caveat: for a pig that will live in the garden, it is better to make its paws not from cardboard, but from bottle caps. The same applies to the ears and eyes - it is better to cut them out of bottle plastic, and cover the finished figurine with decorative varnish to protect the paint from moisture. You can use special paints intended for exterior finishing work.

Ready! The pig was made by hand! If you plan to use it in the future, you can immediately attach a loop of wire or strong thread to the back. If the pig will decorate the house or garden, you can leave it in this form.

You can make a pig out of a bottle using a slightly different technique. In this embodiment, the plastic bottle is not painted, but is wrapped in pink paper.

340 468

The symbol of the coming year 2022 is a yellow pig. In this article we will look at several simple step-by-step master classes on how to make a piglet with your own hands.

We will show in detail how you can make your own from materials that can easily be found in every home, such DIY crafts for the year of the pig as a piggy bank, we will make piglets from dough, we will make simple crafts for kindergarten, we will learn how to sew a pig from children's tights and socks, we will make a pig-ball from threads, we will make a coffee toy, and we will also learn how to sew a tilde pig from fabric. And at the end of the article you will find a video bonus: making a pig from pompoms as a gift for the New Year. So, if you're ready, let's get started!

Practical crafts from plastic bottles of different capacities

Practical products include hanging flower pots that help decorate the walls of residential and outbuildings located on the territory of the dacha, the internal and external surfaces of fences.

Crafts made with your own hands from plastic bottle caps are easy to make; if you collect consumables, these products will complement the overall composition and help you make full use of available materials and your own imagination.

Thanks to the wear-resistant properties of plastic, practical crafts are created from it, which will serve for a long time to decorate the yard and garden, the local area and the house itself and will allow you to improve your skills.

There are no limits to fantasy

Using plastic bottles of various shapes and sizes, you can also make small souvenir piggy banks or containers for storing bulk products.

You can also create other characters, for example, frogs, an elephant, a hedgehog and much more, as in the photo: